1 files · 15 KB · netcdf

7-day average sea surface temperature (SST) from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites, 2006-present, is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)

1 files · 16 KB · netcdf

Climatological 7-day average sea surface temperature (SST) from 2007 to 2025, i.e. there are 52 7-day periods each representing a 2007-2025 mean SST for that period. The 18-year period for averaging begins May 21, 2007 and ends May 20, 2025. Data are merged from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites. SST is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. Finally, the 18-year climatological average for each 7-day period is averaged from the 7-day files. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [sevenDayPeriodOfYear][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)

1 files · 16 KB · netcdf

Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 15 KB · netcdf

Jet Propulsion Laboratory SST MUR data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 15 KB · netcdf

Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 30 KB · netcdf

NOAA Coral Reef Watch Daily (v3.1) Global 5km Satellite Sea Surface Temperature (CoralTemp). CoralTemp is derived from three different but related 5km daily gap-free SST data sets and provides an internally consistent SST product that stretches from 1985 to present: Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) Sea Surface Temperature Reanalysis (1985-2002), Geo-Polar Blended Night-only Sea Surface Temperature Reanalysis (2002-2016), Geo-Polar Blended Night-only Sea Surface Temperature Near Real-Time (2017 to present). cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): analysed_sst (analysed sea surface temperature, degree_C) sea_ice_fraction (1)

1 files · 13 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/Office of Satellite and Product Operations (OSPO) office from Visible and Infrared Imager/Radiometer Suite (VIIRS) sensor cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][altitude][rows][cols]): l2p_flags swath_latitude (Latitude, degrees_north) swath_longitude (Longitude, degrees_east) sea_surface_temperature (sea surface subskin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) graphics (graphics overlay planes)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, kelvin) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, kelvin) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 40 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/OSPO office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 40 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/OSPO office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 19 KB · netcdf

This is a product of NOAA Coral Reef Watch Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite, derived from CoralTemp v1.0. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (analysed sea surface temperature, degree_C) mask (Pixel characteristics flag array, pixel_classification) sea_surface_temperature_anomaly (degree_C)

1 files · 19 KB · netcdf

This is a product of NOAA Coral Reef Watch Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite, derived from CoralTemp v1.0. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (analysed sea surface temperature, degree_C) mask (Pixel characteristics flag array, pixel_classification) sea_surface_temperature_anomaly (degree_C)

1 files · 16 KB · netcdf

A daily Sea Surface Temperature (SST) Anomaly product created by ERD based on JPL MUR's climatology (2003-2014) of the Jet Propulsion Laboratory's (JPL) Multi-scale Ultra-high Resolution (MUR), merged, multi-sensor L4 v4.1 Foundation SST analysis product (part of the Group for High-Resolution Sea Surface Temperature (GHRSST) project). The data for the most recent 4 days is usually revised everyday. The data for other days is sometimes revised. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sstAnom (sea surface temperature anomaly, degree_C) mask (sea/land field composite mask)

1 files · 16 KB · netcdf

This monthly Sea Surface Temperature (SST) Anomaly product is a simple mean of the daily anomaly product created by ERD for a given month. The daily anomalies were created by ERD based on JPL MUR's climatology (2003-2014) of the Jet Propulsion Laboratory's (JPL) Multi-scale Ultra-high Resolution (MUR), merged, multi-sensor L4 v4.1 Foundation SST analysis product (part of the Group for High-Resolution Sea Surface Temperature (GHRSST) project). cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sstAnom (Sea Surface Temperature Anomaly Monthly Mean, degree_C) mask (sea/land field composite mask)

1 files · 26 KB · netcdf

A low-resolution version of the Multi-scale Ultra-high Resolution (MUR) Sea Surface Temperature (SST) analysis, a merged, multi-sensor L4 Foundation SST analysis product from Jet Propulsion Laboratory (JPL). cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): analysed_sst (analysed sea surface temperature, degree_C) analysis_error (estimated error standard deviation of analysed_sst, degree_C) mask (sea/land field composite mask) sea_ice_fraction (sea ice area fraction) sst_anomaly (SST anomaly from a seasonal SST climatology based on the MUR data over 2003-2014 period, kelvin)

1 files · 16 KB · netcdf

A daily Sea Surface Temperature (SST) Anomaly product created by ERD based on JPL MUR's climatology (2003-2014) of the Jet Propulsion Laboratory's (JPL) Multi-scale Ultra-high Resolution (MUR), merged, multi-sensor L4 v4.1 Foundation SST analysis product (part of the Group for High-Resolution Sea Surface Temperature (GHRSST) project). The data for the most recent 4 days is usually revised everyday. The data for other days is sometimes revised. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sstAnom (sea surface temperature anomaly, degree_C) mask (sea/land field composite mask)