Melnik, Elena
hybrid · semantic + lexical · 528 datasets ranked · 3.95s
Melnik, Elena
13 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
7 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
4 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
25 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
40 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
19 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
25 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
25 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
25 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Melnik, Elena
37 files · 4.5 MB · tiff
This data set contains thermographic images for the visualisation of watermarks. An IRCAM Equus 327k with Watermark Imager software (Fraunhofer) version 8.416 (R2016b) was used.
Wolf, Gerhard · Kolbe, Georg
2 files · 14 MB · pdf, tiff
Historical questionnaire/s 1924/1948 and index cards, partly selected enclosures regarding the history of a German pharmacy, catalogued via Kalliope portal (Historischer Fragebogen 1924/1948 und Karteikarten, ggf. gemeinfreie Anlagen zur Apothekengeschichte; als Katalog dient das Nachlassportal Kalliope): https://kalliope-verbund.info/DE-611-BF-70963 [Funktion: Im Findbuch anzeigen] Please note: The Kalliope catalogue entry might indicate related material in the archival folder which cannot be published due to copyright or other legal restrictions (NB: Das Katalogisat bei Kalliope kann auch auf Materialien - teils erheblichen Umfangs - verweisen, die aus archiv- oder urheberrechtlichen Gründen nicht veröffentlicht werden dürfen).
Wang, Yafei
15 files · 129 KB · tiff
A gridded time-series dataset reconstructing population distribution across the Yellow River Basin, China, from 1000 to 2000 AD, with a temporal resolution of one century and a spatial resolution of 10 km.
Wang, Wei · Liu, Cheng · Han, Lianhuan · et al.
10 files · 211 KB · tiff
Cyclic voltammograms (CVs) obtained at the 35-nm radius gold nanoelectrode in 0.5 M H2SO4 solution deoxygenated under argon at different scan rates (from 0.3 to 1 V/s). The potential range is 0-1.75 V vs RHE. The data in the text files is given in the following format: Potential vs. RHE (V) | Current (A) Scan rate is indicated in the text file name. The figure Voltammograms.tif shows all CVs in this dataset.
Paduano, Angelo · Scarano, Francesco · Casalino, Damiano · et al.
200 rows × 10 cols · 39 KB · csv, jpeg
10 numeric
The interaction between acoustic waves and turbulent grazing flow over an acoustic liner is investigated using Lattice-Boltzmann Very-Large-Eddy simulations. A single-degree-of-freedom liner with 11 streamwise-aligned cavities is studied in a grazing flow impedance tube. The conditions replicate reference experiments from the Federal University of Santa Catarina. The influence of grazing flow (with a centerline Mach number of 0.32), acoustic wave amplitude, frequency, and propagation direction relative to the mean flow is analysed. Impedance is computed using both direct (i.e. the in-situ method) and model-fitting inference (i.e. the mode-matching method) methods. The former reveals strong spatial variations; however, averaged values throughout the sample show minimal differences between upstream and downstream propagating waves, in contrast to what is obtained with the latter method. Flow analyses reveal that the orifices displace the flow away from the face sheet, with this effect amplified by acoustic waves and dependent on the wave propagation direction. Consequently, the boundary layer displacement thickness ($\delta^*$) increases along the streamwise direction compared to a smooth wall and exhibits localised humps downstream of each orifice. The growth of $\delta^*$ alters the flow dynamics within the orifices by weakening the shear layer at downstream positions. This influences the acoustic-induced mass flow rate through the orifices at equal Sound Pressure Level, suggesting that acoustic energy is dissipated differently along the liner. The asymmetry of the flow field experienced by the acoustic wave, depending on its propagation direction, highlights the need to consider a spatially evolving turbulent flow when studying the acoustic-flow interaction and measuring impedance.
1 files · 29 KB · netcdf
NOAA Coral Reef Watch (v3.1 CoralTemp) Daily Global 5km Satellite Sea Surface Temperature Anomaly. This is a product of NOAA Coral Reef Watch Daily Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature_anomaly (degree_C) mask (pixel characteristics flag array, pixel_classification)
1 files · 15 KB · netcdf
7-day average sea surface temperature (SST) from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites, 2006-present, is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)
1 files · 16 KB · netcdf
Climatological 7-day average sea surface temperature (SST) from 2007 to 2025, i.e. there are 52 7-day periods each representing a 2007-2025 mean SST for that period. The 18-year period for averaging begins May 21, 2007 and ends May 20, 2025. Data are merged from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites. SST is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. Finally, the 18-year climatological average for each 7-day period is averaged from the 7-day files. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [sevenDayPeriodOfYear][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)
1 files · 16 KB · netcdf
Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)
1 files · 15 KB · netcdf
Jet Propulsion Laboratory SST MUR data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)
1 files · 15 KB · netcdf
Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)