Kantor, Rose · Shakya, Migun · Ruth, Nelson · et al.

2,095 rows · 907 KB · fasta, tsv

A virus genome database representing 21,015 near-complete virus genomes collected from untargeted ultra-deep RNA/DNA combined sequencing of wastewater. Sequence data was provided by the CASPER consortium and raw data may be found on NCBI SRA under bioprojects PRJNA1247874 and PRJNA1198001. Data underwent read trimming, rRNA and human read removal, de novo assembly, and selection of high-quality viral contigs. Contigs were clustered at 95% identity and 85% query coverage to dereplicate. Chimera-checking required at least two independent assemblies of the same viral genome or presence of the genome in another reference database. Annotation made use of RdRpCATCH, geNomad, checkV, BLASTN against NCBI core-nt, and RNAVirHost. The RdRp fasta files contain representative RdRp sequences identified through homology to major RdRp reference databases and clustered at 90% sequence identity over 75% sequence coverage. Included sequences contain all three conserved RdRp motifs (A, B, and C) arranged in either the canonical ABC configuration or the permuted CAB configuration.

Robert Koch-Institut · AKTIN-Notaufnahmeregister

5 files · 10 KB · pdf, tsv, zip

Der Datensatz "Daten der Notaufnahmesurveillance" wird durch das Robert Koch-Institut und das AKTIN-Notaufnahmeregister bei Krankenhausaufnahmen bereitgestellt. Der Datensatz beinhaltet aggregierte Routinedaten aus deutschen Notaufnahmen zur syndromischen Überwachung von akuten Erkrankungen. Dazu zählen grippeähnliche Erkrankungen (ILI), Coronavirus-Erkrankungen (COVID-19), akute respiratorische Erkrankungen (ARE), gastrointestinale Infektionen (GI) und schwere akute respiratorische Infektionen (SARI). Dabei wird der relative Anteil dieser Erkrankungen an der Gesamtzahl der Notaufnahmevorstellungen sowie die berechneten Erwartungswerte und Prädiktionsintervalle ausgewiesen. Die Daten sind nach Notaufnahmetypen und Altersgruppen aggregiert. Damit bietet der Datensatz eine wertvolle Ressource für die Forschung im Bereich der Notfallmedizin und der Überwachung akuter Gesundheitsereignisse in Deutschland.

Paduano, Angelo · Scarano, Francesco · Casalino, Damiano · et al.

200 rows × 10 cols · 39 KB · csv, jpeg

10 numeric

The interaction between acoustic waves and turbulent grazing flow over an acoustic liner is investigated using Lattice-Boltzmann Very-Large-Eddy simulations. A single-degree-of-freedom liner with 11 streamwise-aligned cavities is studied in a grazing flow impedance tube. The conditions replicate reference experiments from the Federal University of Santa Catarina. The influence of grazing flow (with a centerline Mach number of 0.32), acoustic wave amplitude, frequency, and propagation direction relative to the mean flow is analysed. Impedance is computed using both direct (i.e. the in-situ method) and model-fitting inference (i.e. the mode-matching method) methods. The former reveals strong spatial variations; however, averaged values throughout the sample show minimal differences between upstream and downstream propagating waves, in contrast to what is obtained with the latter method. Flow analyses reveal that the orifices displace the flow away from the face sheet, with this effect amplified by acoustic waves and dependent on the wave propagation direction. Consequently, the boundary layer displacement thickness ($\delta^*$) increases along the streamwise direction compared to a smooth wall and exhibits localised humps downstream of each orifice. The growth of $\delta^*$ alters the flow dynamics within the orifices by weakening the shear layer at downstream positions. This influences the acoustic-induced mass flow rate through the orifices at equal Sound Pressure Level, suggesting that acoustic energy is dissipated differently along the liner. The asymmetry of the flow field experienced by the acoustic wave, depending on its propagation direction, highlights the need to consider a spatially evolving turbulent flow when studying the acoustic-flow interaction and measuring impedance.

1 files · 29 KB · netcdf

NOAA Coral Reef Watch (v3.1 CoralTemp) Daily Global 5km Satellite Sea Surface Temperature Anomaly. This is a product of NOAA Coral Reef Watch Daily Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature_anomaly (degree_C) mask (pixel characteristics flag array, pixel_classification)

1 files · 15 KB · netcdf

7-day average sea surface temperature (SST) from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites, 2006-present, is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)

1 files · 16 KB · netcdf

Climatological 7-day average sea surface temperature (SST) from 2007 to 2025, i.e. there are 52 7-day periods each representing a 2007-2025 mean SST for that period. The 18-year period for averaging begins May 21, 2007 and ends May 20, 2025. Data are merged from the AVHRR and VIIRS instruments aboard the NOAA and MetOp satellites. SST is generated by NOAA/NESDIS/STAR using the Advanced Clear-Sky Processor for Oceans (ACSPO) processing system. Only nighttime overpasses are used and composited into daily mean grids (~830 m), then the daily composite grids are averaged into gridded 7-day temperature averages. Finally, the 18-year climatological average for each 7-day period is averaged from the 7-day files. More info: https://eastcoast.coastwatch.noaa.gov/cw_avhrr-viirs_sst.php cdm_data_type = Grid VARIABLES (all of which use the dimensions [sevenDayPeriodOfYear][level][latitude][longitude]): sst (sea_surface_subskin_temperature, degree_C)

1 files · 16 KB · netcdf

Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 15 KB · netcdf

Jet Propulsion Laboratory SST MUR data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 15 KB · netcdf

Jet Propulsion Laboratory data from a local source. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][level][latitude][longitude]): sst (Analysed SST with land and ice masks applied, degree_C)

1 files · 30 KB · netcdf

NOAA Coral Reef Watch Daily (v3.1) Global 5km Satellite Sea Surface Temperature (CoralTemp). CoralTemp is derived from three different but related 5km daily gap-free SST data sets and provides an internally consistent SST product that stretches from 1985 to present: Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) Sea Surface Temperature Reanalysis (1985-2002), Geo-Polar Blended Night-only Sea Surface Temperature Reanalysis (2002-2016), Geo-Polar Blended Night-only Sea Surface Temperature Near Real-Time (2017 to present). cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): analysed_sst (analysed sea surface temperature, degree_C) sea_ice_fraction (1)

1 files · 13 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/Office of Satellite and Product Operations (OSPO) office from Visible and Infrared Imager/Radiometer Suite (VIIRS) sensor cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][altitude][rows][cols]): l2p_flags swath_latitude (Latitude, degrees_north) swath_longitude (Longitude, degrees_east) sea_surface_temperature (sea surface subskin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) graphics (graphics overlay planes)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, kelvin) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, kelvin) sses_bias (SSES bias estimate, kelvin) sses_standard_deviation (kelvin) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 40 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/OSPO office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 40 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/OSPO office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 17 KB · netcdf

Sea surface temperature retrievals produced by NOAA/NESDIS/STAR office cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (sea surface sub-skin temperature, degree_C) sses_bias (SSES bias estimate, degree_C) sses_standard_deviation (degree_C) l2p_flags l3s_flags sst_count (Count of input L3U SST pixels) quality_level (quality level of SST pixel) sst_source (Source of major (highest weight) contribution to sst) satellite_zenith_angle (degrees) dt_analysis (deviation from SST reference, kelvin) sea_ice_fraction (1) wind_speed (m s-1) sst_dtime (time difference from reference time, seconds) measurement_dtime (time difference of highest weighted input SST from reference time. Is equal to sst_dtime for pixels where L3S-LEO-PM_N is available, seconds) sst_gradient_magnitude (SST gradient magnitude value, kelvin/km) sst_front_position (Binary SST front position indicator)

1 files · 19 KB · netcdf

This is a product of NOAA Coral Reef Watch Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite, derived from CoralTemp v1.0. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (analysed sea surface temperature, degree_C) mask (Pixel characteristics flag array, pixel_classification) sea_surface_temperature_anomaly (degree_C)

1 files · 19 KB · netcdf

This is a product of NOAA Coral Reef Watch Global 5km Satellite Coral Bleaching Heat Stress Monitoring Product Suite, derived from CoralTemp v1.0. cdm_data_type = Grid VARIABLES (all of which use the dimensions [time][latitude][longitude]): sea_surface_temperature (analysed sea surface temperature, degree_C) mask (Pixel characteristics flag array, pixel_classification) sea_surface_temperature_anomaly (degree_C)